Features
- High output 5W Osram LEDs produce a crisp, white light that we shape using precisely formed and aligned reflectors. This ensures an even distribution of light and perfectly formed spot beam for distance down the road.
- 5700°K colour temperature LED’s blend the perfect balance of white light while retaining the best possible definition and Colour Rendering Index (CRI).
- Our heavy duty stainless steel brackets are suitable for the rigours of off-road, 4WD tracks and have been finished in a durable black powder coat with white BR GEAR logos.
- Each lamp includes our innovative rubber dampening system to help isolate the housing from the bracket and reduce vibration on the electronics.
- We use a 3mm thick virtually unbreakable polycarbonate lens with hard coating for increased scratch resistance and protection from exposure to UV light.
- Our lamps are also tested and complied to ECE R10 for Electro Magnetic Compatibility (EMC), meaning you should not have any problems interfering with sensitive equipment.
- Each lamp also includes a clear see though polycarbonate cover for protection from stone spray and debris.
- Fully sealed and tested to IP68 for dust and water ingress protection, meaning they are waterproof for up to 3m of submersion. Perfectly suited for river crossings.
Beam Diagram
1 Lux at 921m (with two lamps)
| Specifications | BR9032 |
|---|---|
| Wattage | 90W |
| Input Voltage | 12/24V |
| Current Draw 12V (single Lamp) | 11A |
| LEDs (Osram) | 30 x 5W |
| Colour Temperature | 5700°K |
| EMC | ECE R10 |
| IP Rating | IP68 |
| Raw Lumens | 15000 |
| Effective Lumens | 9056 |
| 1 Lux Distance (two lamps) | 921m |
| Warranty | 3 Years |
| Weight | 3.8kg (Single) |
What you get
BRG 9" Inch LED Driving Lights
- BR9032 x BRG 9" Inch LED Driving Light x2
- Big Red Gear Lens Cover
- Stainless Steel Bolts, Nuts and Washers
- Rubber Mounting Pad
- 2 Position DT lead Connector
- Product Instructions
Plug and Play Wiring Harness
- Plug and Play wiring harness x1
- HB3 and H4 high beam adaptor
- 12V 40A relay
- 12V rocker switch
- Product instructions
You may also like
FAQs
The kit includes two BR9032 9 inch BRG LED driving lights, clear lens covers, stainless steel mounting hardware, rubber mounting pads, 2-position DT leads and a plug-and-play wiring harness. The harness includes HB3 and H4 high-beam adaptors, a 12V 40A relay, rocker switch and 30A fuse.
Yes. The BR9032 lights use 5700K Osram LEDs and, as a pair, produce 1 lux at 921 metres. They are fully sealed to IP68 for dust and water ingress protection and use heavy-duty stainless steel brackets for off-road conditions.
Use the supplied mounting hardware and plug-and-play wiring harness. The harness includes HB3 and H4 high-beam adaptors; check your vehicle fitment before installation because some vehicles require a different adaptor. If you are not confident with automotive wiring, use a qualified auto electrician.
IP68 means the BR9032 lights are sealed against dust and water ingress. Big Red Gear tests these lights for submersion to 3 metres, which makes them suitable for wet, dusty off-road conditions and river crossings.
A pair of BR9032 lights produces 1 lux at 921 metres. Their 5700K Osram LEDs provide a natural white light for long-range visibility.
Check the road rules that apply where you drive and make sure the lights are installed and used in accordance with local vehicle-lighting requirements.
The lights use heavy-duty black powder-coated stainless steel brackets and stainless steel mounting hardware. Each light also has a rubber dampening system and a 3mm hard-coated polycarbonate lens for vibration, impact, scratch and UV protection.
Yes. The BR9032 lights are covered by a 3-year warranty. See our Australian warranty information for the applicable terms.
The BR9032 lights are rated for 12V and 24V. The supplied BR9095 harness includes a 12V relay plus HB3 and H4 high-beam adaptors, so complete-kit compatibility depends on your vehicle’s voltage and high-beam connection. Use the adaptor finder on this page and have the installation checked by a qualified auto electrician.
