BRG and Covert series, 5 to 9 inch
Around the vehicle and the campsite
Wiring, fitment and mounting
One twin-head compressor, three ways to buy it
Air down fast, air up all four at once
Compressor and lights in one box
Portable 12V power built around your N70 battery
Keep the second battery topped up and in view
Poly tanks, by where they fit
Poly tanks, by shape
Pick the litres, then the shape that fits
Fittings
Set the vehicle up in one order
Compressor plus the tyre tools to match
A pair of lights with the wiring harness
| Specifications | BRBM500 |
|---|---|
| System Voltage | 12V / 24V / 36V / 48V DC |
| Voltage Display Range | 8V – 100V |
| Shunt Rating | 500A (External) |
| Standby Current | <20mA |
| Display | LCD (V, A, W, Ah, °C, %, IN/OUT) |
| Adjustable Alarms | Over/Under-Voltage, Over-Current, Over-Temperature |
| Audible Alarm Pattern | 0.5s on / 0.5s off |
| Display Unit Dimensions | 74.8 × 74.8 × 40.8 mm |
| Flush Mount Cut-Out | Ø55 mm |
| Shunt Dimensions | 85.0 × 42.0 × 37.8 mm |
| Mounting | Surface Bracket or Flush Mount |
| Warranty | 2 Years |
12V, 24V, 36V and 48V DC systems, with a voltage display range of 8V to 100V.
Yes - the Ah capacity must be set during initial installation as the monitor doesn't auto-detect it. It's also recommended to calibrate 0% (battery fully discharged) and 100% (battery fully charged) so the percentage reading is accurate.
The display shows the net current - charge current minus load.
It should be installed by a competent person familiar with DC electrical systems. Always disconnect the battery before wiring and fit an appropriately rated fuse close to the battery positive.
Press the SET button - this mutes the audible alarm and returns the monitor to normal operation.
Surface mount using the supplied bracket, or flush mount via a Ø55 mm hole cut in the mounting surface.
